DEKO FG Silent is particularly suitable for areas where extra high sound reduction is required. The DEKO FG Silent partition can be constructed with several different types of sound rated safety glass which provides up to 50 dB sound reduction. Maximum partition glass size depending from fire rate and sound requirements. More information you can get from DEKO sales department. The fully glazed partition with high sound reduction is a natural extension to our existing range of fully glazed partitions, as today our customers demand consistently higher sound reduction and an exclusive design with glazed elements at full height. DEKO FG Silent can be constructed as entire glazed partitions with or without doors - or as glazed partitions built into our own system partitions in gypsum DEKO PV and DEKO PF.

DEKO MG double glazed modules can transform traditional system partitions filling work spaces with brightness, adding interest and interaction. DEKO MG - BearingPoint DenmarkDEKO MG modules are high quality, dust free, pre­assembled modules which are ready for installation immediately they arrive on site. Compatible with both DEKO PV and DEKO PF they are based on the same post construction and can be fitted without the need for any site based modifications. DEKO MG modules are completely reusable and can be incorporated as single modules or be used to form continuous glazed walls. If DEKO MG is not part of the initial construction phase the modules can be fitted at a later stage with minimal disruption. Maximum partition glass size depending from fire rate and sound requirements. More information you can get from DEKO sales department.

It is proven that daylight has a considerable effect on general well-being and job satisfaction, and that unacceptable levels of noise in the working environment disturb concentration. Like all our products DEKO GV is prefabricated, systematised, and developed to be flexible and reusable. DEKO GV is designed with a unique post construction that makes it possible to set up continuous glazed elements or to combine them with solid panels of decoration or timber or with a matching door. The design of the post construction allows the designer to choose between a vertical or horizontal modular sequence. The cavity in the studs can be used to carry cables for sockets, etc. Maximum partition glass size depending from fire rate and sound requirements. More information you can get from DEKO sales department.

Flexible partitioning solutions are essential in contemporary buildings. Speed and ease of installation and demountability are paramount to the maximisation of available office space. DEKO PV - VELFACDEKO PV is flexible and functional, enabling the partition to be adapted to suit all types of buildings. DEKO PV is the perfect choice, as it creates a strong and stable drywall that can be installed in a single work routine. The system is also extremely price competitive. DEKO PV components are reusable, and matching glazed partitions or doors can be incorporated both during the initial installation and retrospectively. Alterations can be completed with little disruption to surrounding finishes. Maximum partition glass size depending from fire rate and sound requirements. More information you can get from DEKO sales department.

DEKO PF is a profile free system partition which is constructed in the same way as DEKO PV with the slim aluminium profiles being replaced with a discrete pencil line or bevel edge joint, giving the partition a minimalistic appearance. DEKO PF is flexible and functional and can be adapted to suit the requirements of all types of buildings. DEKO PF is the perfect choice where minimal detailing is important: it is a ready-made partition giving desirable strength and stability ratings. In addition, it is easily installed and is price competitive. Maximum partition glass size depending from fire rate and sound requirements. More information you can get from DEKO sales department.

The DEKO HG Fire floor glass makes it possible to pass on daylight to the underlying storeys, and thus allows daylight to be utilised in places in the building where this was not previously possible. DEKO HG Fire is a single and fire rated glazed element fitted on a matching fireproof steel substructure. DEKO HG Fire has been tested and approved as REI 30 ,REI 60 and REI90 structures, but can, if required, be made with laminated glass without fire classification. DEKO HG Fire structure provides a high sound reduction of approximately Rw 55 dB. The DEKO HG Fire structure has been tested and approved by the Danish Fire Safety Institute (DBI) in accordance with Eurocode norms with a maximum load of 5 kN/m2, The glazed elements and the steel structure are tailored individually to each project. The glazed elements in sizes up to approximately 2 m² are either fitted as a single glazed element or as several elements in line with each other supported by the matching T-profile.

Single doors are available in module sizes from 700 x 2100 mm to 1200 x 2100 mm, double doors in size 1800 x 2100 mm. Non standard sizes are available to order. 4 or 6 mm clear toughened glass is used for the glazed sections of Deko DG glazed doors. Where specific fire or sound ratings are requried special glass can be inserted. In the standard format DEKO Doors can be delivered with approval and certification and sound classifications up to 35 dB. All doors are prefabricated, which eliminates any need for site finishing after installation. All DEKO Doors have been awarded the Danish Indoor Climate Labelling.

DEKO MV – the flexible panel wall. Flexibility is a key concept for DEKO; so naturally, our product range includes a well designed panel wall system. Like the DEKO FV folding partition, DEKO MV is perfect for dividing a large area into smaller units. With each element being operated individually there are countless stacking options, e.g. in panel enclosures or in separate rooms. The DEKO MV panel wall is produced in various finishes according to customers’ specific requirements enabling the panel wall to have the same appearance as adjacent surfaces.

DEKO folding partitions consist of individual panels which are joined together. The panels are built to a high standard, and consist of aluminium profiles, timber panels, and sound absorbing insulation material, which make it possible to achieve a sound reduction up to Rw 52 dB. The panels are 80 mm thick. Their size depends on the height and length of the partition. Folding partitions can be built as one continuous partition with the last section functioning as a door, or as two partitions connecting in the middle. The last element will always be a door module equipped with a ball catch and a recessed handle. When the partition is closed, the modules are locked with a concealed cremone bolt in every other panel. The top and the bottom of the panels are fitted with a rubber strip that seals tightly when the partitions are locked. The edges of the panels have a protective trim to prevent damage. As standard, the edge trims are produced in natural anodised aluminium, but they can also be supplied in other colours if required. Tracks and joints are produced in white, as standard; however, other colours are available on request. Vision panels using float glass, acoustic glass, or thermo glass can be incorporated.

DEKO folding partitions consist of individual panels which are joined together. The panels are built to a high standard, and consist of aluminium profiles, timber panels, and sound absorbing insulation material, which make it possible to achieve a sound reduction up to Rw 52 dB. The panels are 80 mm thick. Their size depends on the height and length of the partition. Folding partitions can be built as one continuous partition with the last section functioning as a door, or as two partitions connecting in the middle. The last element will always be a door module equipped with a ball catch and a recessed handle. When the partition is closed, the modules are locked with a concealed cremone bolt in every other panel. The top and the bottom of the panels are fitted with a rubber strip that seals tightly when the partitions are locked. The edges of the panels have a protective trim to prevent damage. As standard, the edge trims are produced in natural anodised aluminium, but they can also be supplied in other colours if required. Tracks and joints are produced in white, as standard; however, other colours are available on request. Vision panels using float glass, acoustic glass, or thermo glass can be incorporated.

DEKO folding partitions consist of individual panels which are joined together. The panels are built to a high standard, and consist of aluminium profiles, timber panels, and sound absorbing insulation material, which make it possible to achieve a sound reduction up to Rw 52 dB. The panels are 80 mm thick. Their size depends on the height and length of the partition. Folding partitions can be built as one continuous partition with the last section functioning as a door, or as two partitions connecting in the middle. The last element will always be a door module equipped with a ball catch and a recessed handle. When the partition is closed, the modules are locked with a concealed cremone bolt in every other panel. The top and the bottom of the panels are fitted with a rubber strip that seals tightly when the partitions are locked. The edges of the panels have a protective trim to prevent damage. As standard, the edge trims are produced in natural anodised aluminium, but they can also be supplied in other colours if required. Tracks and joints are produced in white, as standard; however, other colours are available on request. Vision panels using float glass, acoustic glass, or thermo glass can be incorporated.

DEKO folding partitions consist of individual panels which are joined together. The panels are built to a high standard, and consist of aluminium profiles, timber panels, and sound absorbing insulation material, which make it possible to achieve a sound reduction up to Rw 52 dB. The panels are 80 mm thick. Their size depends on the height and length of the partition. Folding partitions can be built as one continuous partition with the last section functioning as a door, or as two partitions connecting in the middle. The last element will always be a door module equipped with a ball catch and a recessed handle. When the partition is closed, the modules are locked with a concealed cremone bolt in every other panel. The top and the bottom of the panels are fitted with a rubber strip that seals tightly when the partitions are locked. The edges of the panels have a protective trim to prevent damage. As standard, the edge trims are produced in natural anodised aluminium, but they can also be supplied in other colours if required. Tracks and joints are produced in white, as standard; however, other colours are available on request. Vision panels using float glass, acoustic glass, or thermo glass can be incorporated.

FG2, a double layer fully glazed partition in an elegant aluminum, which provide a high sound reduction up to 45-48 dB. All vertical joints between glass are in silicone. FG2 are therefore without any vertical studs/mullions. The two layer of glass is fixed with profiles in same dimension as the single layer FG glass in the height of 30 or 40mm. FG2 can in that way be combined with other wall types from DEKO, without compromise line of the design. Beside situations where the client, whish for high sound performance, the FG2 wall can also be chosen, if the client whish for a glazed wall type, expressing thickness as a balance to the solid walls which is enter up to. The FG2 wall can be furnished with both glazed or solid doors within the DEKO range of products.